At some point, every homeowner will have to face the dreaded task of home repairs. Whether it’s a leaky faucet or a broken window, there’s always something that needs to be fixed.
Image Title: Workman screwing window frame during housework
And while some repairs are relatively simple and inexpensive, others can be pretty costly and time-consuming, and looking for quick ways to finance home repairs on the internet can be a saving grace for some.
So to help you prepare yourself when this time comes, here are the top 5 home repairs you’re likely to encounter in your lifetime!
1. Fixing a Leaky Faucet
A dripping faucet may seem like a minor problem, but it can actually waste a lot of water (and money) if left unchecked. Fortunately, most leaks can be easily fixed with just a few tools and some basic knowledge.
There are three general types: compression, ball, and disc.
- Compression Faucets: These are the most common type and are usually easy to fix. The repair steps involve replacing the o-ring, which is a small rubber ring that creates a seal between the valve and spout.
- Ball Faucets: These faucets have a ceramic cartridge inside that controls water flow and temperature. If your ball faucet is leaking, chances are it’s because this cartridge has worn out and needs to be replaced.
- Disc Faucets: Disc faucets have two discs that move against each other to control water flow and temperature. If your disc faucet is leaking, it’s likely because one or both of these discs are damaged and need to be replaced.
2. Repairing a Clogged Drain
You’re in the middle of cooking dinner when you notice the water in the sink starting to back up. You quickly realise that you’ve got a clogged drain.
If this is something that’s never happened to you before, you might be wondering what to do.
The good news is that fixing a clogged drain is relatively simple and can often be done without calling a plumber.
- One of the most common ways to clear a clog is to use a plunger. Just place the plunger over the drain and push and pull it up and down. You might need to do this several times before the clog starts to break up.
- Another option is to use a drain snake. This is a long, flexible tool that you insert into the drain and then turn in a clockwise direction. This can help to break up the clog so that water can start flowing through again.
With a little effort, you should be able to fix the problem on your own.
3. Fixing a Cracked Tile
It’s happened to everyone at some point – you’re going about your business, minding your own business, when you suddenly hear a loud crack. And it’s coming from your floor. You investigate and sure enough, there’s a cracked tile.
But don’t worry, fixing a cracked tile is actually a pretty easy repair that anyone can do.
- First, you’ll want to gather the following supplies: a tile saw or nippers, replacement tiles, tile adhesive, and grout.
- Once you have your supplies, start by removing the damaged tile. If the tile is relatively small, you can use a pair of nippers to break it into pieces.
- For larger tiles, you’ll want to score the surface with a tile saw and then tap along the line with a hammer until the tile snaps in two.
- With the old tile out of the way, clean up any adhesive or grout that may be left behind.
- Then, apply fresh adhesive to the back of the replacement tile and press it into place.
- Finally, fill in any gaps with grout and allow everything to dry.
And that’s it!
In just a few simple steps, you’ve successfully repaired a cracked tile.
4. Changing an Outlet Plate
It’s easy to take outlets for granted until one stops working.
If you find yourself in this situation, don’t fret!
Changing an outlet plate is a relatively simple repair that anyone can do. Just follow these steps and you’ll have a working outlet in no time.
- First, start by shutting off the power to the outlet at your home’s breaker box.
- Then, remove the screws from the outlet plate and carefully pull it away from the wall.
- Next, unscrew the wires from the old outlet and attach them to the new one. Be sure to match up the black wires (hot), white wires (neutral), and green wires (ground).
- Finally, screw the new outlet into place and turn on the power at the breaker box.
- Test the outlet to make sure it’s working properly, and you’re done!
So there you have it!
Changing an outlet plate is a quick and easy repair that anyone can do.
5. Cleaning the Gutters
You take a look up at your gutters and realise it’s been a while since you last cleaned them. It’s not exactly a fun task, but you know it needs to be done.
After all, the last thing you want is for your gutters to get full of leaves and debris and start causing problems.
With a little know-how and the right tools, cleaning your gutters can be a quick and painless process. Here’s what you need to know to get the job done right.
- First, gather your supplies. You’ll need a ladder, a pair of gloves, and a sturdy garbage bag.
- Once you have everything you need, begin by removing any debris from the ground around your gutters. This will help to prevent messes and make it easier to reach everything in the gutters themselves.
- Next, use your ladder to climb up and take a look inside the gutters.
- Use your gloved hand to remove any leaves, twigs, or other debris that you find.
- Be sure to dispose of everything in your garbage bag.
- Once the gutters are clean, flush them out with water from a hose to remove any remaining dirt or debris.
And that’s it! You’ve successfully cleaned your gutters.
There you have it!
These are some of the most common home repairs that you’re likely to encounter. While some of them may seem daunting, remember that they can all be tackled with a little bit of knowledge and elbow grease. If you need help to fix these issues you can check strong boy hire to help you out.
So don’t be afraid to roll up your sleeves and get to work!
Your home will thank you for it.
Have any other tips for tackling common home repairs? Share them in the comments below!